Map Samples Good examples of what can be done and what outputs to expect.

This data was collected by various users using their own flight rigs and uploaded to our system. These sample maps show the different kinds of outputs that are automatically created with Maps Made Easy.
All Maps Made Easy creations are easy to share and embed in any site just as these samples are. With each sample we have provided links to the different file formats that are available after our processing.

Olympic Training Center, Chula Vista, California - Full screen
Data provided by Drones Made Easy

This georeferenced orthophoto map and colorized relative elevation map was automatically created from 1133 geo-tagged 4000 x 3000 images. They were taken with a DJI Phantom 3 Professional and the Map Pilot for iOS app. An area of 234.75 acres was covered with 1.9 inch/pixel ground resolution from an altitude of 360 ft above ground level.

Additional Output Samples



RTK Verified Coal Stockpile - 10,000 cubic meters
3D Volume Measurements Enabled
Bomaderry, New South Wales - Full screen
Data provided by Drones Made Easy

This georeferenced orthophoto map and colorized relative elevation map was automatically created from 28 geo-tagged 4000 x 3000 images. They were taken with a DJI Phantom 3 Professional using the Map Pilot for iOS app.

Use the polygon tool to measure 3D volumes and areas.



Oglala National Grassland
Crawford, Nebraska - Full screen
Data provided by Colorado Unmanned, LLC

This georeferenced colorized relative elevation map were automatically created from 235 4000 × 3000 images. They were taken with a DJI Phantom 3 Pro. The 21 acre site was covered with .7 inch/pixel ground resolution from an altitude of 150ft above ground level.



Riverbend Marketplace Construction Progress - February 20, March 20, May 7 and June 10
Fort Lauderdale, Florida - Full screen
Data provided by G4global

This is an example of a Location Map, or a multi-layer map of the same location. The layers are all taken with a free-flown (no ground station) DJI Inspire 1. The February 20 layer was georeferenced to an existing basemap while other layers are refereced to that for maximum alignment accuracy. Location Maps allow users to define what base layers and overlays are shown and it what order.

This will continue to be updated as new layers become available and construction progresses.



Balmaceda Rio NDVI, Chile - Full screen
Data provided by Latitud Drones

This georeferenced, colorized relative elevation and NDVI job was automatically created from 124 geo-tagged 4000 × 3000 images. They were taken with a Canon PowerShot S100 modified with a notch filter for near IR acceptance. An area of 50 acres was covered with 1.4 inch/pixel ground resolution from an altitude of 330 feet above ground level. The presence of a NIR channel instead of one of the standard RGB channels allows the (NIR-Vis)/(NIR+Vis) normalization equation to highlight areas of crop stress.



Cottage - 3D Model Preview
Low Wood, UK - Full screen
Data provided by Visual Perspectives UK

This data was collected with a DJI Inspire 1. Every job processed by Maps Made Easy generates an easily embeddable and fully interactive 3D model preview. There is a full 3D OBJ model that contains all of the information, but this 10,000 face preview is small enough to stick in any website with an iFrame embed code.




Maps Made Easy Image Stitching